The 'Move' circuit assembly

Assemble a simple, pre-made circuit with vibration that you can incorporate into your 3D designs.

7. Connect the vibration motor and slideswitch

The last step is to connect the vibration motor to the switch so it's easy to turn on and off.

You may want to slide the switch to the top position to prevent your motor from turning on when you are wiring the switch.

    Picture of Connect the Vibration Motor and Slideswitch

    Thread the positive (red) wire from the vibration motor into the hole of the middle pin of the slide switch, ensuring that the wire does not touch the bottom pin of the switch.

    Use needle-nose pliers to give the connection a good squeeze, which will help secure the wire to the pin and ensure that the wire does not touch any other pin of the slide switch.